Material Properties:Moderate heat resistance｜Thermal stability｜Creep resistance｜Fatigue resistance｜high strength｜High rigidity
Application Areas:Automotive sector｜component｜Electronic field｜Electrical field
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature		ASTM D-648	250 °C
UL flame retardant rating		UL 94	HB
Heat Deflection Temperature		ASTM D-648	260 °C
thermal conductivity			0.3 W/(m.K)
Linear coefficient of thermal expansion		ASTM D-696	3 ×10-5/K
specific heat			1590 J/(kg.k)
Combustibility (rate)		UL 94	HB
Heat Deflection Temperature		ASTM D648/ISO 75	260 ℃（℉）
Heat Deflection Temperature	Heat Deflection Temperature		ASTM D648/ISO 75	264 ℃（℉）

other	Test Condition	Test Method	Test Result
characteristic			玻纤增强含热稳定增强

processability	Test Condition	Test Method	Test Result
Dry conditions			2-3小时 80-90度

Basic performance	Test Condition	Test Method	Test Result
Water absorption rate			1.7 %

Mechanical properties	Test Method	Test Result
flexural coefficient	ASTM D-790	9.3(6.3) GPa
tensile strength	ASTM D-638	186(132) Mpa
bending strength	ASTM D-790	289(216) Mpa
Rockwell hardness	ASTM D-785	96(75) M Scale
Impact strength of cantilever beam gap	ASTM D-256	127(147) J/m
Elongation at break	ASTM D-638	3(5) %
Rockwell hardness	ASTM D-785	120(112) R scale

Other performance	Test Condition	Test Method	Test Result
Limiting Oxygen Index		ASTM D-2863	23 %

Physical properties	Test Condition	Test Method	Test Result
shrinkage rate		旭化成方法	0.4/0.9 %
Wear factor		ASTM D-1044	15 ×10-6kg/1000times

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top