Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA66 1402G ASAHI JAPAN

Leona™

Automotive sector,component,Electronic field,Electrical field

Moderate heat resistance,Thermal stability,Creep resistance,Fatigue resistance,high strength,High rigidity

Plastic Datasheets

Other performance	Test Condition	Test Method	ASAHI JAPAN/1402G
Extreme Oxygen Index	干	ASTM D-2863	23 %

Basic Performance	Test Condition	Test Method	ASAHI JAPAN/1402G
Water absorption rate	湿		1.7 %

machinability	Test Condition	Test Method	ASAHI JAPAN/1402G
Dry conditions			2-3小时 80-90度

thermal performance	Test Condition	Test Method	ASAHI JAPAN/1402G
Combustibility (rate)		UL 94	HB
Hot deformation temperature	HDT	ASTM D648/ISO 75	264 ℃（℉）
		1.82MPa,干	ASTM D-648	250 °C
		0.46MPa,干	ASTM D-648	260 °C
Linear coefficient of thermal expansion	干	ASTM D-696	3 ×10-5/K
specific heat	干		1590 J/(kg.k)
thermal conductivity	干		0.3 W/(m.K)
UL flame retardant rating	干	UL 94	HB

mechanical properties	Test Condition	Test Method	ASAHI JAPAN/1402G
bending strength	干(湿)	ASTM D-790	289(216) Mpa
Elongation at Break	干(湿)	ASTM D-638	3(5) %
flexural coefficient	干(湿)	ASTM D-790	9.3(6.3) GPa
Impact strength of cantilever beam gap	干(湿)	ASTM D-256	127(147) J/m
Rockwell hardness	干(湿)	ASTM D-785	96(75) M Scale
Rockwell hardness		干(湿)	ASTM D-785	120(112) R scale
tensile strength	干(湿)	ASTM D-638	186(132) Mpa

other	Test Condition	Test Method	ASAHI JAPAN/1402G
characteristic			玻纤增强含热稳定增强

Physical properties	Test Condition	Test Method	ASAHI JAPAN/1402G
Shrinkage rate	干	旭化成方法	0.4/0.9 %
Wear factor	湿	ASTM D-1044	15 ×10-6kg/1000times

Get App

Top