Technical Data Sheet thermal performance Test Condition Test Method Test Result Hot deformation temperature 0.45 MPa, Unannealed ISO 75-2/B 260 °C Hot deformation temperature 1.8 MPa, Unannealed ISO 75-2/A 253 °C Glass transition temperature ISO 11357-2 80.0 °C Melting temperature ISO 11357-3 262 °C Linear coefficient of thermal expansion Flow ISO 11359-2 2.8E-5 cm/cm/°C Linear coefficient of thermal expansion Across Flow ISO 11359-2 9.5E-5 cm/cm/°C Effective thermal diffusivity coefficient 6.85E-8 m²/s
flammability Test Condition Test Method Test Result Burning rate 1.00 mm ISO 3795 24 mm/min UL flame retardant rating UL 94 HB UL flame retardant rating UL 94 HB Extreme Oxygen Index ISO 4589-2 24 % FMVSS combustion rate FMVSS 302 SE/B Atomization F-value (refraction) ISO 6452 95 % Atomization G-value (condensate) ISO 6452 3.0E-4 g
Filling analysis Test Condition Test Method Test Result Melt density 1.21 g/cm³ Specific Heat Capacity of Melt 2290 J/kg/°C Thermal Conductivity of Melt 0.21 W/m/K Emission of Organic Compounds VDA 277 6.00 µgC/g Odor VDA 270 4.50
Physical properties Test Condition Test Method Test Result Shrinkage rate 横向Flow ISO 294-4 1.1 % Shrinkage rate Flow ISO 294-4 0.30 % Water absorption rate Saturation, 23°C, 2.00 mm ISO 62 6.9 % Water absorption rate Equilibrium, 23°C, 2.00 mm, 50% RH ISO 62 2.0 %
Electrical performance Test Condition Test Method Test Result Surface resistivity IEC 62631-3-2 -- ohms Volume resistivity IEC 62631-3-1 1.0E+11 ohms·m Dissipation factor 100 Hz IEC 62631-2-1 0.016 Dissipation factor 1 MHz IEC 62631-2-1 0.016 Compared to the anti leakage trace index 3.00 mm UL 746 PLC 0 Compared to the anti leakage trace index IEC 60112 PLC 0
injection Test Condition Test Method Test Result drying temperature 80 °C Drying time - hot air dryer 2.0 to 4.0 hr Suggested maximum moisture content 0.20 % Processing (melt) temperature 285 to 305 °C Melt Temperature, Optimum 295 °C Mold temperature 70 to 120 °C Mold Temperature, Optimum 100 °C Maintain pressure 50.0 to 100 Mpa Maintain pressure Drying Recommended yes Hold Pressure Time 3.00 s/mm Maximum Screw Tangential Speed 12 m/min
mechanical properties Test Condition Test Method Test Result Tensile modulus ISO 527-2 9800 Mpa tensile strength Break ISO 527-2 195 Mpa Tensile strain Break ISO 527-2 3.5 %
impact performance Test Condition Test Method Test Result Impact strength of simply supported beam without notch -30°C ISO 179/1eU 60 kJ/m² Impact strength of simply supported beam without notch 23°C ISO 179/1eU 80 kJ/m²
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
