PA6

PA6 Ultramid® B3EG5 BASF GERMANY

290

Unit Price:US$ 2,366 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
153.3MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:enhance
Application Areas:Automotive sector
Color:--
Grade:Enhanced level

Material Certification

Technical Data Sheet

other	Test Condition	Test Method	Test Result
characteristic			高机械强度、刚度和热稳定性.低温抗冲击性

Other performance	Test Condition	Test Method	Test Result
impact strength	+23℃干/湿		10/30 J
Compared to the Leakage Traceability Index (CTI)	干/湿		干/湿

impact performance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch	23℃	kJ/m²	10.679to17.642

mechanical properties	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	+23℃，干/湿		12/25 KJ/m
Charpy Notched Impact Strength	Charpy Notched Impact Strength	30℃，干/湿		10 KJ/m
Fracture stress (V=50mm/min)	干/湿		160/105 Mpa
Tensile yield stress (V=50mm/min)	干/湿		160/105 Mpa
Charpy Notched Impact Strength	干/湿		80/105 KJ/m
elongation	≤0.5%, +23℃，湿		3000 Mpa
bending strength	干/湿		220/150 Mpa
Elongation at Break	干/湿，V=50mm/min		3.5/8.5 %
Impact strength of cantilever beam gap	+23℃，干/湿		12/17 KJ/m
Charpy Notched Impact Strength	30℃，干		75 KJ/m
Ball Pressure Test	干/湿		210/140 Mpa
Elongation at Break	干/湿，V=50mm/min		3.5/8.5 %
Tensile modulus	干/湿		8000/5500 Mpa
Bending modulus	干/湿		7400/4200 Mpa
Tensile creep modulus	1000h，湿		3000 Mpa
tensile strength	Break,23℃		95.17to284.83 MPa
Tensile strain	Break,23℃	%	2.5-3.0
Tensile modulus	23℃		0.01.0.01E0.05-0.01.0.04E0.05 MPa
Charpy Notched Impact Strength		ASTM D256/ISO 179	80 kg·cm/cm(J/M)ft·lb/in
	Charpy Notched Impact Strength		ASTM D256/ISO 179	10 kg·cm/cm(J/M)ft·lb/in
		Charpy Notched Impact Strength		ASTM D256/ISO 179	12 kg·cm/cm(J/M)ft·lb/in
		Charpy Notched Impact Strength	Charpy Notched Impact Strength		ASTM D256/ISO 179	75 kg·cm/cm(J/M)ft·lb/in
Impact strength of cantilever beam gap		ASTM D256/ISO 179	12 kg·cm/cm(J/M)ft·lb/in
Tensile modulus		ASTM D638/ISO 527	8000 kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	7400 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	2020 kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	3.5 %

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8MPa负荷，Dry		210 °C
thermal conductivity	Dry		0.26 W/(m.K)
Maximum operating temperature			200 °C
Linear coefficient of thermal expansion	23-80℃Dry		2-2.5/6-7
specific heat	Dry		1.5 J/(g.K)
Temperature index	在20000h/5000h，后拉伸强度下降50%时		120/150 °C
Hot deformation temperature	0.45MPa负荷，Dry		220 °C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	°C	239to261
Combustibility (rate)		UL 94	HB
Hot deformation temperature	HDT	ASTM D648/ISO 75	210(1.80MPa) ℃（℉）
Melting temperature			220 ℃（℉）
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	0.2-0.25 mm/mm.℃

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate	23℃	%	0.20-1.0
density		ASTM D792/ISO 1183	1320
Shrinkage rate		ASTM D955	0.35 %
melt mass-flow rate		ASTM D1238/ISO 1133	55 （cm3/10min 275℃/5kg ) g/10min
Water absorption rate		ASTM D570/ISO 62	6.8-7.4 %

Electrical performance	Test Condition	Test Method	Test Result
Loss angle	1MHz，干/湿		0.025/0.24
Volume resistivity	干/湿		10 Ω.cm
Dielectric strength	K20/P50，干/湿		80/70 KV/mm
Surface resistivity	干/湿		10 Ω
Dielectric constant	1MHz，干/湿		3.8/7
Dielectric constant	Dielectric constant		ASTM D150/IEC 60250	3.8
Volume resistivity		ASTM D257/IEC 60093	1E 13 Ω.cm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top

PA6 Ultramid® B3EG5 BASF GERMANY

Material Description

Material Certification

Technical Data Sheet Compare

Technical Data Sheet