Mechanical properties	Test Method	Test Result
Tensile modulus	ISO 527-2/1A	6200 Mpa
tensile strength	ISO 527-2/1A	125 Mpa
Tensile strain	ISO 527-2	3.0 %
Flexural modulus	ISO 178	5300 Mpa
bending strength	ISO 178	-- Mpa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch		ISO 179/1eU	41 kJ/m²

Electrical performance	Test Method	Test Result
Surface Resistivity	IEC 60093	6.0E+15 ohms
Volume resistivity	IEC 60093	1.0E+15 ohms·cm
dielectric strength	IEC 60243-1	31 KV/mm
Dissipation Factor	IEC 60250	0.010
Compared to the Leakage Tracking Index (CTI)	IEC 60112	PLC 1

injection	Test Condition	Test Method	Test Result
drying temperature			80 °C
Suggested maximum moisture content			0.20 %
Temperature at the rear of the barrel			270 to 280 °C
Temperature in the middle of the barrel			275 to 285 °C
Temperature at the front of the material cylinder			280 to 290 °C
Temperature			70 to 100 °C

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/Af	245 °C
melting temperature		ISO 11357-3	263 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top