Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 A218V15 SOLVAY FRANCE
TECHNYL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | SOLVAY FRANCE/A218V15 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 41 kJ/m² |
Mechanical properties | Test Condition | Test Method | SOLVAY FRANCE/A218V15 |
---|---|---|---|
Tensile modulus | 23°C | ISO 527-2/1A | 6200 Mpa |
Tensile strain | 断裂, 23°C | ISO 527-2 | 3.0 % |
bending strength | 23°C | ISO 178 | -- Mpa |
Flexural modulus | 23°C | ISO 178 | 5300 Mpa |
tensile strength | 断裂, 23°C | ISO 527-2/1A | 125 Mpa |
Electrical performance | Test Condition | Test Method | SOLVAY FRANCE/A218V15 |
---|---|---|---|
dielectric strength | 2.00 mm | IEC 60243-1 | 31 KV/mm |
Dissipation Factor | IEC 60250 | 0.010 | |
Volume resistivity | IEC 60093 | 1.0E+15 ohms·cm | |
Compared to the Leakage Tracking Index (CTI) | 解决方案 A | IEC 60112 | PLC 1 |
Surface Resistivity | IEC 60093 | 6.0E+15 ohms |
flammability | Test Condition | Test Method | SOLVAY FRANCE/A218V15 |
---|---|---|---|
UL flame retardant rating | 3.2 mm | UL 94 | HB |
Limiting Oxygen Index | ISO 4589-2 | 24 % |
physical property | Test Condition | Test Method | SOLVAY FRANCE/A218V15 |
---|---|---|---|
Water absorption rate | 24 hr, 23°C | ISO 62 | 1.1 % |
Thermal performance | Test Condition | Test Method | SOLVAY FRANCE/A218V15 |
---|---|---|---|
melting temperature | ISO 11357-3 | 263 °C | |
Heat distortion temperature | 1.8 MPa, 未退火,HDT | ISO 75-2/Af | 245 °C |
injection | Test Condition | Test Method | SOLVAY FRANCE/A218V15 |
---|---|---|---|
Suggested maximum moisture content | 0.20 % | ||
Temperature in the middle of the barrel | 275 to 285 °C | ||
Temperature at the rear of the barrel | 270 to 280 °C | ||
drying temperature | 80 °C | ||
Temperature at the front of the material cylinder | 280 to 290 °C | ||
Temperature | 70 to 100 °C |
Contact Us
Get App
Top