Technical Data Sheet hardness Test Condition Test Method Test Result Rockwell hardness M -Sale ISO 2039-2 79 Rockwell hardness R -Sale ISO 2039-2 121
thermal performance Test Condition Test Method Test Result Hot deformation temperature 0.45 MPa, Unannealed ISO 75-2/B 190 °C Hot deformation temperature 1.8 MPa, Unannealed ISO 75-2/A 70.0 °C Glass transition temperature ISO 11357-2 60.0 °C Vicat softening temperature ISO 306/B50 240 °C Melting temperature ISO 11357-3 262 °C Linear coefficient of thermal expansion Flow ISO 11359-2 1.0E-4 cm/cm/°C Linear coefficient of thermal expansion Across Flow ISO 11359-2 1.1E-4 cm/cm/°C Effective thermal diffusivity coefficient 5.00E-8 m²/s
flammability Test Condition Test Method Test Result UL flame retardant rating UL 94 V-2 UL flame retardant rating UL 94 V-2 Extreme Oxygen Index ISO 4589-2 28 % FMVSS combustion rate FMVSS 302 DNI Atomization F-value (refraction) ISO 6452 99 % Atomization G-value (condensate) ISO 6452 1.0E-4 g
Filling analysis Test Condition Test Method Test Result Melt density 0.970 g/cm³ Top out temperature 190 °C Specific Heat Capacity of Melt 2790 J/kg/°C Thermal Conductivity of Melt 0.16 W/m/K Emission of Organic Compounds VDA 277 5.00 µgC/g Odor VDA 270 3.00
film Test Condition Test Method Test Result elongation Yield， MD ISO 527-3 4.5 %
Physical properties Test Condition Test Method Test Result density ISO 1183 1.14 g/cm³ Shrinkage rate 横向Flow ISO 294-4 1.4 % Shrinkage rate Flow ISO 294-4 1.4 % Water absorption rate Saturation, 23°C, 2.00 mm ISO 62 8.5 % Water absorption rate Equilibrium, 23°C, 2.00 mm, 50% RH ISO 62 2.6 % Stickiness 96% H2SO4 ISO 307 150 cm³/g
Electrical performance Test Condition Test Method Test Result Surface resistivity IEC 62631-3-2 -- ohms Volume resistivity IEC 62631-3-1 1.0E+12 ohms·m Dielectric strength IEC 60243-1 32 KV/mm Relative permittivity 1 MHz IEC 62631-2-1 3.50 Relative permittivity 100 Hz IEC 62631-2-1 3.80 Dissipation factor 100 Hz IEC 62631-2-1 8.0E-3 Dissipation factor 1 MHz IEC 62631-2-1 0.018 Compared to the anti leakage trace index IEC 60112 PLC 0
injection Test Condition Test Method Test Result drying temperature 80 °C Drying time - hot air dryer 2.0 to 4.0 hr Suggested maximum moisture content 0.20 % Processing (melt) temperature 280 to 300 °C Melt Temperature, Optimum 290 °C Mold temperature 50 to 90 °C Mold Temperature, Optimum 70 °C Maintain pressure 50.0 to 100 Mpa Maintain pressure Drying Recommended yes Hold Pressure Time 4.00 s/mm Maximum Screw Tangential Speed 24 m/min
mechanical properties Test Condition Test Method Test Result Tensile modulus ISO 527-2 3100 Mpa tensile strength Yield ISO 527-2 82.0 Mpa Tensile strain Yield ISO 527-2 4.5 % Nominal tensile fracture strain ISO 527-2 25 % Tensile creep modulus 1 hr ISO 899-1 -- Mpa Tensile creep modulus 1000 hr ISO 899-1 -- Mpa Bending modulus ISO 178 2800 Mpa
impact performance Test Condition Test Method Test Result Charpy Notched Impact Strength -30°C ISO 179/1eA 4.5 kJ/m² Charpy Notched Impact Strength 23°C ISO 179/1eA 5.5 kJ/m² Impact strength of simply supported beam without notch -30°C ISO 179/1eU 400 kJ/m² Impact strength of simply supported beam without notch 23°C ISO 179/1eU 无断裂
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
