film	Test Condition	Test Method	Test Result
OTr	23°C2	DIN 53380-3	1.4 cc-25µm/m²-day-atm
OTr	OTr	23°C3	DIN 53380-3	1.3 cc-25µm/m²-day-atm
Water Vapor Transmission Rate	38°C	DIN 53122	0.400 g-25µm/(m² day-atm)

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	230°C/2.16 kg	内部方法	14 g/10 min
Water absorption rate	平衡, 23°C, 50% RH	ISO 62	0.040 %

injection	Test Condition	Test Method	Test Result
drying temperature			90 °C
drying time			8.0 to 24 hr
Suggested maximum moisture content			0.010 %
Temperature at the rear of the barrel			185 to 195 °C
Temperature in the middle of the barrel			205 to 215 °C
Temperature at the front of the material cylinder			205 to 215 °C
Spray nozzle temperature			200 to 210 °C
Processing (melt) temperature			225 to 235 °C

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ISO 527-2/1A/1	14400 Mpa
tensile strength	断裂	ISO 527-2/1A/5	151 Mpa
Tensile strain	断裂	ISO 527-2/1A/5	1.6 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top