Material Properties:High hardness｜High rigidity｜high strength｜High toughness｜Heat aging｜Chemical resistance｜Solvent resistant｜High traffic
Application Areas:Automotive components｜Office equipment｜Electronic and Electrical Applications｜Connector｜Cooling fan
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
density	ASTM D792	1.67 g/cm
Water absorption rate	ASTM D570	0.015 %
Rockwell hardness	ASTM D785	100

Mechanical properties	Test Method	Test Result
Impact strength of cantilever beam gap	ASTM D256	92 J/m
Suspended wall beam without notch impact strength	ASTM D256	353 J/m
tensile strength	ASTM D638	186 MPa
elongation	ASTM D638	1.7 %
Flexural modulus	ASTM D790	13700 MPa
bending strength	ASTM D790	240 MPa
Poisson's ratio	ASTM E132	0.4
coefficient of friction	ASTM D1894	0.44

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTM D257	8E+16 ohms
Volume resistivity		ASTM D257	1E+16 Ohm.cm
dielectric strength		ASTM D149	12 kV/mm
dielectric constant		ASTM D150	4.5
dielectric constant	dielectric constant		ASTM D150	4.5
Dissipation Factor		ASTM D150	0.002
Dissipation Factor	Dissipation Factor		ASTM D150	0.002
arc resistance		ASTM D495	120 sec
Compared to the Leakage Tracking Index (CTI)		UL 746	V

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	270 ℃
Linear coefficient of thermal expansion		ASTM D696	0.000016 cm/cm/℃
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion		ASTM D696	0.00007 cm/cm/℃
UL flame retardant rating		UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top