Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS 1140A6 HD9100 PTM NANTONG
DURACON®
Automotive components,Office equipment,Electronic and Electrical Applications,Connector,Cooling fan
High hardness,High rigidity,high strength,High toughness,Heat aging,Chemical resistance,Solvent resistant,High traffic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | PTM NANTONG/1140A6 HD9100 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 270 ℃ |
| Linear coefficient of thermal expansion | 垂直 | ASTM D696 | 0.00007 cm/cm/℃ |
| Flow | ASTM D696 | 0.000016 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | V-0 |
| mechanical properties | Test Condition | Test Method | PTM NANTONG/1140A6 HD9100 |
|---|---|---|---|
| Bending modulus | ASTM D790 | 13700 MPa | |
| bending strength | ASTM D790 | 240 MPa | |
| elongation | Break | ASTM D638 | 1.7 % |
| Friction coefficient | VS.ltself-Dynamic | ASTM D1894 | 0.44 |
| Impact strength of cantilever beam gap | ASTM D256 | 92 J/m | |
| Poisson's ratio | ASTM E132 | 0.4 | |
| Suspended wall beam without notch impact strength | ASTM D256 | 353 J/m | |
| tensile strength | ASTM D638 | 186 MPa |
| Electrical performance | Test Condition | Test Method | PTM NANTONG/1140A6 HD9100 |
|---|---|---|---|
| Arc resistance | ASTM D495 | 120 sec | |
| Compared to the anti leakage trace index | UL 746 | V | |
| Dielectric constant | 1000Hz | ASTM D150 | 4.5 |
| 1E+6Hz | ASTM D150 | 4.5 | |
| Dielectric strength | 3.00mm | ASTM D149 | 12 kV/mm |
| Dissipation factor | 1E+6Hz | ASTM D150 | 0.002 |
| 1000Hz | ASTM D150 | 0.002 | |
| Surface resistivity | ASTM D257 | 8E+16 ohms | |
| Volume resistivity | ASTM D257 | 1E+16 Ohm.cm |
| Physical properties | Test Condition | Test Method | PTM NANTONG/1140A6 HD9100 |
|---|---|---|---|
| density | ASTM D792 | 1.67 | |
| Rockwell hardness | M-Scale | ASTM D785 | 100 |
| Water absorption rate | 24hr,23℃ | ASTM D570 | 0.015 % |