Material Properties:transparent｜Crystallization occurs at the water inlet or mold temperature too high｜Balanced mold temperature requirements｜No hot spots
Application Areas:Higher impact strength｜Can replace transparent ABS or some PC applications
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

physical property	Test Method	Test Result
transmittance	ASTM D-1003	91 %
Haze ratio	ASTM D-1003	0.3 %
Shrinkage rate	ASTM D-955	0.002-0.006 in/in

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate			15 g/10min

Mechanical properties	Test Method	Test Result
Tensile stress	ASTM D-638	6700/7700 psi
tensile strength	ASTM D-790	9700 psi
Rockwell hardness	ASTM D-785	105 R
Impact strength of cantilever beam gap	ASTM D-256	7/1.1 ft-lb/in
elongation at break	ASTM D-638	5/310 %
Flexural modulus	ASTM D-790	2.75×105 psi

Other performance	Test Condition	Test Method	Test Result
intrinsic viscosity			0.72

Thermal performance	Test Condition	Test Method	Test Result
combustibility		UL 94	V-2
Heat distortion temperature		ASTM D-648	65 °C
Heat distortion temperature	Heat distortion temperature		ASTM D-648	73 °C
vicat		ASTM D-1525	85 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top