PBT Toraycon® 1401X06 TORAY JAPAN
326
- Unit Price:US$ 3,258 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:46MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Flame retardant
- Application Areas:Automotive sector｜Shell
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M计秤,23°C | ISO 2039-2 | 77 |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 非增强标准级 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Combustibility (rate) | UL 94 | HB | |
| Heat Deflection Temperature | HDT | ASTM D648/ISO 75 | 60 1.8Mpa ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 9.4*10^-5 mm/mm.℃ | |
| ASTM D-696 | 9.4 cm/cm℃×10 | ||
| Heat Deflection Temperature | 0.45MPa,未退火 | ISO 75-2/B | 150 °C |
| 1.8MPa,未退火 | ISO 75-2/A | 60.0 °C | |
| Linear coefficient of thermal expansion | MD：-30到100°C | ISO 11359-2 | 1.1E-04 cm/cm/°C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 23℃·24小时 | ASTM D-570 | 0.08 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| BarFlowLength | 250°C,1.00mm | 内部方法 | 103 mm |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -40°C | ISO 179 | NoBreak |
| 23°C | ISO 179 | 240 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | ASTM D150/IEC 60250 | 3.3 | |
| volume resistivity | ASTM D257/IEC 60093 | 4.0*10^14 Ω.cm | |
| ASTM D-257 | 4.0 cm×10 | ||
| dielectric strength | 短时·23℃·1/8时 | ASTM D-149 | 17 KV/mm |
| arc resistance | ASTM D-495 | 144 秒 | |
| dielectric constant | 23°C,1kHz | IEC 60250 | 3.30 |
| Dissipation Factor | 23°C,50Hz | IEC 60250 | 2E-03 |
| 23°C,1MHz | IEC 60250 | 0.020 | |
| arc resistance | IEC 60950 | 144 sec | |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 0 |
| volume resistivity | IEC 60093 | 8E+16 ohms·cm | |
| dielectric strength | IEC 60243-1 | 17 KV/mm | |
| dielectric constant | 23°C,50Hz | IEC 60250 | 3.30 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.31 | |
| Water absorption rate | ASTM D570/ISO 62 | 0.08 % | |
| Taber abraser | 1.000g·CS-17 | ASTM D-1044 | 10 毫克/1.000m |
| shrinkage rate | 80×80×3板材 | 1.7-2.3 % | |
| coefficient of friction | 金属 | ASTM D-1894 | 0.13 |
| 本身 | ASTM D-1894 | 0.17 | |
| Heat Deflection Temperature | 4.6kg/cm | ASTM D-648 | 154 °C |
| 18.6kg/cm | ASTM D-648 | 58 °C | |
| shrinkage rate | TD:3.00mm2 | 内部方法 | 2.3 % |
| MD:3.00mm4 | 内部方法 | 1.7 % | |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.080 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 45 kg·cm/cm(J/M)ft·lb/in | |
| ASTM D256/ISO 179 | 35 kg·cm/cm(J/M)ft·lb/in | ||
| ASTM D256/ISO 179 | nb kg·cm/cm(J/M)ft·lb/in | ||
| ASTM D256/ISO 179 | 120 kg·cm/cm(J/M)ft·lb/in | ||
| Elongation at break | ASTM D638/ISO 527 | 100 % | |
| tensile strength | ASTM D638/ISO 527 | 55 kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | M75 | |
| flexural modulus | ASTM D790/ISO 178 | 2.5 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 85 kg/cm²(MPa)[Lb/in²] | |
| 23℃ | ASTM D-790 | 900 kg/cm | |
| tensile strength | 23℃ | ASTM D-638 | 600 kg/cm |
| flexural modulus | 23℃ | ASTM D-790 | 26 kg/cm |
| Rockwell hardness | ASTM D-785 | 75 M标度 | |
| Elongation at break | 23℃ | ASTM D-638 | 15 % |
| Impact strength of cantilever beam gap | 无缺口，23℃ | ASTM D-256 | 不破裂 kg·cm/cm |
| 无缺口，-40℃ | ASTM D-256 | 120 kg·cm/cm | |
| 缺口，23℃ | ASTM D-256 | 4.4 kg·cm/cm | |
| 缺口，-40℃ | ASTM D-256 | 3.5 kg·cm/cm | |
| compressive strength | 23℃ | ASTM D-695 | 900 kg/cm |
| Tensile modulus | 23°C | ISO 527-2 | 2700 Mpa |
| tensile strength | 屈服,23°C | ISO 527-2 | 55.0 Mpa |
| Tensile strain | 断裂,23°C | ISO 527-2 | 30 % |
| flexural modulus | 23°C | ISO 178 | 2500 Mpa |
| bending strength | 23°C | ISO 178 | 90.0 Mpa |
| coefficient of friction | 0.17 | ||
| Friction coefficient - vs. Metal | SuzukiMethod | 0.13 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top