Material Properties:Low temperature resistance｜High temperature resistance｜Thermal stability｜currency｜injection molding ｜injection molding
Application Areas:Electric wire｜Cable｜Automotive sector
Color:--
Grade:Injection grade

Technical Data Sheet Compare

Basic performance	Test Method	Test Result
Water absorption rate	ISO 62	0.6 %
melt mass-flow rate	ISO 1133	15 g/10min
density	ISO 1183	1290 kg/m

Other performance	Test Condition	Test Method	Test Result
Water absorption rate		ISO 62	0.15 %

Mechanical properties	Test Method	Test Result
Shore hardness	ISO 868	72 -
Tensile modulus	ISO 527	1000 Mpa
tensile strength	ISO 527	38 Mpa
Impact strength of cantilever beam gap	ISO 180/1A	9 KJ/m

Electrical performance	Test Method	Test Result
dielectric constant	IEC 60250	3.7 -
Volume resistivity	IEC 60093	1E+13
Surface Resistivity	IEC 60093	1E+15 ＞
dielectric strength	IEC 60243	23 KV/mm
Compared to the Leakage Tracking Index (CTI)	IEC 60112	-

Thermal performance	Test Method	Test Result
melting temperature	ISO 11357	221 °C
Heat distortion temperature	ISO 75	120 °C
vicat	ISO 306	160 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top