Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPEE EL740-S DSM HOLAND
Arnitel®
Electric wire,Cable,Automotive sector
Low temperature resistanc,High temperature resistan,Thermal stability,currency,injection molding ,injection molding
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Other performance | Test Condition | Test Method | DSM HOLAND/EL740-S |
---|---|---|---|
Water absorption rate | ISO 62 | 0.15 % |
Basic Performance | Test Condition | Test Method | DSM HOLAND/EL740-S |
---|---|---|---|
density | ISO 1183 | 1290 kg/m | |
melt mass-flow rate | ISO 1133 | 15 g/10min | |
Water absorption rate | ISO 62 | 0.6 % |
thermal performance | Test Condition | Test Method | DSM HOLAND/EL740-S |
---|---|---|---|
Hot deformation temperature | 0.45MPa | ISO 75 | 120 °C |
Melting temperature | ISO 11357 | 221 °C | |
Vicat softening temperature | ISO 306 | 160 °C |
mechanical properties | Test Condition | Test Method | DSM HOLAND/EL740-S |
---|---|---|---|
Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 9 KJ/m |
Shore hardness | ISO 868 | 72 - | |
Tensile modulus | ISO 527 | 1000 Mpa | |
tensile strength | ISO 527 | 38 Mpa |
Electrical performance | Test Condition | Test Method | DSM HOLAND/EL740-S |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | - | |
Dielectric constant | IEC 60250 | 3.7 - | |
Dielectric strength | IEC 60243 | 23 KV/mm | |
Surface resistivity | IEC 60093 | 1E+15 > | |
Volume resistivity | IEC 60093 | 1E+13 |