mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	50mm/min	ISO 527-2	34	Mpa
elongation at yield	50mm/min	ISO 527-2	8	%
Elongation at Break	50mm/min	ISO 527-2	>50	%
Impact strength of simply supported beam without notch	23℃	ISO 179/1eU	110	kJ/m²
Charpy Notched Impact Strength	23℃	ISO 179/1eU	2.5	kJ/m²
Ball Pressure Test	H358/30	ISO 2039-1	78	Mpa
Tensile modulus	1mm/min	ISO 527-2	1500	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 3146	163	°C
Hot deformation temperature	0.45MPa	ISO 75-2	85	°C
Vicat softening temperature	A50(10N)	ISO 306	154	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	230℃，2.16kg	ISO 1133	24	g/10min
density		ISO 1183	0.91	g/cm³

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top