thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8MPa	ISO 179-1993	180 °C
combustibility	1.6mm	ISO 1210UL 94	HB V
Glow wire combustion index (GWFI)	1.6mm	IEC 695-2-1	650 °C
melting temperature	---	ISO 3146C	222 °C
Linear coefficient of thermal expansion	23℃-85℃	ISO 75-2	4.2 E-5/℃

Electrical performance	Test Condition	Test Method	Test Result
volume resistivity	---	IEC 93	10 E14.ohm.cm
Compared to the Leakage Traceability Index (CTI)	---	IEC 112	550 V
Surface Resistivity	---	IEC 93	0.1 E14.ohm
dielectric constant	1MHz	IEC 250	3.8 ---
Dielectric loss	1MHz	IEC 250	0.02 ---

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	在23℃，24小时	ISO 62	1.15 %

mechanical properties	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap	---	ISO 180	5 kJ/m²
Elongation at break	---	ISO 527	4 %
Charpy Notched Impact Strength	---	ISO 179-1993	5.5 kJ/m²
Elongation at break	---	ISO 527	120 Mpa
Impact strength of simply supported beam without notch	---	ISO 179-1993	42 kJ/m²
Tensile modulus	---	ISO 527	6100 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top