PC LEXAN™ 121R-21051 SABIC INNOVATIVE US
257
Unit Price:$4919 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 75MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Low viscosity transparent
- Application Areas:building materials Profile
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ASTMD792 | 1.20 | g/cm³ | |
| Specific volume | ASTMD792 | 0.835 | cm³/g | |
| density | ASTMD792 | 1.19 | g/cm³ | |
| Melt mass flow rate | 300°C/1.2kg | ASTMD1238 | 18 | g/10min |
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50to0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.15 | % |
| Equilibrium,23°C | ASTMD570 | 0.35 | % | |
| Equilibrium,100°C | ASTMD570 | 0.58 | % | |
| Outdoor applicability | UL746C | f2 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| tensile strength | Yield | ASTMD638 | 62.1 | Mpa |
| Break | ASTMD638 | 68.9 | Mpa | |
| elongation | Yield | ASTMD638 | 7.0 | % |
| Suspended wall beam gap impact strength | -30°C | ISO180/1A | 11 | kJ/m² |
| 23°C | ISO180/1A | 65 | kJ/m² | |
| 23°C | ASTMD4812 | 3200 | J/m | |
| Unscented Izod Impact Strength | -30°C | ISO180/1U | NoBreak | |
| 23°C | ISO180/1U | NoBreak | ||
| Dart impact equipped with measuring instruments | 23°C,EnergyatPeakLoad | ASTMD3763 | 62.1 | J |
| Falling hammer impact | 23°C | ASTMD3029 | 169 | J |
| Tensile impact strength | ASTMD1822 | 546 | kJ/m² | |
| Rockwell hardness | M-Sale | ASTMD785 | 70 | |
| R-Sale | ASTMD785 | 118 | ||
| elongation | Break | ASTMD638 | 130 | % |
| Bending modulus | 50.0mmSpan | ASTMD790 | 2340 | Mpa |
| bending strength | Yield,50.0mmSpan | ASTMD790 | 96.5 | Mpa |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
| Impact strength of simply supported beam gap | -30°C | ISO179/1eA | 12 | kJ/m² |
| 23°C | ISO179/1eA | 65 | kJ/m² | |
| Simple supported beam without notch impact strength | -30°C | ISO179/1eU | NoBreak | |
| 23°C | ISO179/1eU | NoBreak | ||
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 690 | J/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 138 | °C |
| 1.8MPa,Unannealed,6.40mm | ASTMD648 | 129 | °C | |
| vicat softening point | ASTMD15257 | 154 | °C | |
| Linear coefficient of thermal expansion | MD：-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C |
| specific heat | ASTMC351 | 1260 | J/kg/°C | |
| thermal conductivity | ASTMC177 | 0.25 | W/m/K | |
| RTIElec | UL746 | 130 | °C | |
| RTI Imp | UL746 | 130 | °C | |
| RTIStr | UL746 | 130 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | ASTMD257 | >1.0E+17 | ohms·cm | |
| Hot wire ignition | HWI | UL746 | PLC2 | |
| Dielectric strength | 3.20mm,inAir | ASTMD149 | 15 | KV/mm |
| Dielectric constant | 50Hz | ASTMD150 | 3.17 | |
| 60Hz | ASTMD150 | 3.17 | ||
| 1MHz | ASTMD150 | 2.96 | ||
| Dissipation factor | 50Hz | ASTMD150 | 9E-04 | |
| 60Hz | ASTMD150 | 9E-04 | ||
| 1MHz | ASTMD150 | 0.010 | ||
| Compared to the anti leakage trace index | CTI | UL746 | PLC2 | |
| High arc combustion index | HAI | UL746 | PLC1 | |
| High voltage arc tracing rate | HVTR | UL746 | PLC2 |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Refractive index | ASTMD542 | 1.586 | ||
| Light transmittance | 2540µm | ASTMD1003 | 88.0 | % |
| Haze | 2540µm | ASTMD1003 | 1.0 | % |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.70mm | UL94 | HB | |
| RadiantPanelListing | UL | YES |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top