PEI ULTEM™ 1000 GY SABIC INNOVATIVE US
314
- Unit Price:US$ 24,310 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:30MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Glass fiber reinforced｜Flame retardant｜enhance
- Application Areas:Automotive sector｜Electrical field｜Electronic field
- Color:--
- Grade:Injection grade
Material Certification
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | ISO 1133 | 13.0 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.50 - 0.70 % | |
| Water absorption rate | ISO 62 | 1.3 % | |
| ISO 62 | 0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 140 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-2 | |
| UL 94 | V-0 | ||
| UL 94 | 5VA | ||
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| Limiting Oxygen Index | ISO 4589-2 | 47 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 3200 Mpa | |
| tensile strength | ISO 527-2/50 | 105 Mpa | |
| ISO 527-2/50 | 85.0 Mpa | ||
| Tensile strain | ISO 527-2/50 | 6.0 % | |
| ISO 527-2/50 | 60 % | ||
| Flexural modulus | ISO 178 | 3300 Mpa | |
| bending strength | ISO 178 | 160 Mpa | |
| Taber abraser | 内部方法 | 10.0 mg |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 6.0 kJ/m² | |
| ISO 180/1A | 6.0 kJ/m² | ||
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| ISO 180/1U | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | 1.0E+15 ohms·cm | |
| dielectric strength | IEC 60243-1 | 33 KV/mm | |
| IEC 60243-1 | 25 KV/mm | ||
| IEC 60243-1 | 16 KV/mm | ||
| relative permittivity | IEC 60250 | 2.90 | |
| IEC 60250 | 2.90 | ||
| IEC 60250 | 2.90 | ||
| Dissipation Factor | IEC 60250 | 5.0E-4 | |
| IEC 60250 | 5.0E-4 | ||
| IEC 60250 | 6.0E-3 | ||
| IEC 60250 | 2.5E-3 | ||
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V | |
| IEC 60112 | V |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 150 °C | ||
| drying time | 4.0 to 6.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Hopper temperature | 80 to 120 °C | ||
| Temperature at the rear of the barrel | 340 to 395 °C | ||
| Temperature in the middle of the barrel | 350 to 405 °C | ||
| Temperature at the front of the material cylinder | 360 to 415 °C | ||
| Spray nozzle temperature | 350 to 405 °C | ||
| Processing (melt) temperature | 370 to 410 °C | ||
| Temperature | 140 to 180 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/Be | 200 °C | |
| ISO 75-2/Ae | 190 °C | ||
| vicat | ISO 306/A50 | 215 °C | |
| ISO 306/B50 | 211 °C | ||
| ISO 306/B120 | 212 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | 通过 | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 5.0E-5 cm/cm/°C | |
| ISO 11359-2 | 5.0E-5 cm/cm/°C | ||
| thermal conductivity | ISO 8302 | 0.24 W/m/K | |
| RTI Elec | UL 746 | 170 °C | |
| RTI Imp | UL 746 | 170 °C | |
| RTI | UL 746 | 170 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top