Material Properties:Thermal stability｜High mobility｜standard｜Updatable resources｜Oil resistant｜Biodegradable｜Food contact compliance
Application Areas:chip｜Laminate
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Crystallization peak temperature	DSC)12	ASTM D3418	155to170 °C

optical performance	Test Condition	Test Method	Test Result
gloss	20°,25.4µm	ASTM D2457	90
haze	25.4µm	ASTM D1003	2.1 %

film	Test Condition	Test Method	Test Result
Spencer Impact			2.50 J
film thickness			25 µm
Secant modulus	25µm，MD	ASTM D882	3450 Mpa
Secant modulus	Secant modulus	25µm，TD	ASTM D882	3790 Mpa
tensile strength	Yield,25µm	ASTM D882	103 Mpa
tensile strength	tensile strength	Yield,25µm	ASTM D882	145 Mpa
elongation	断裂,25µm	ASTM D882	180 %
Tensile strain	Break,25µm	ASTM D882	100 %
Elmendorf tear strength	25µm，MD	ASTM D1922	17 g
Elmendorf tear strength	Elmendorf tear strength	25µm，TD	ASTM D1922	14 g
Carbon dioxide transmittance		内部方法	2850 cm³/m²/24hr
OTr		ASTM D1434	675 cm³/m²/24hr
Water Vapor Transmission Rate		ASTMF1249	380 g·mm/m²/atm/24hr

Physical properties	Test Condition	Test Method	Test Result
MediumDensity	230°C		1.08 g/cm³
melt mass-flow rate	210°C/2.16kg	ASTM D1238	7.0 g/10min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top