Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PLA 4032D NATUREWORKS USA
Ingeo™
chip、Laminate
Thermal stability、High mobility、standard、Updatable resources、Oil resistant、Biodegradable、Food contact compliance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | NATUREWORKS USA/4032D |
|---|---|---|---|
| Peak Crystallization Temperature? | DSC)12 | ASTMD3418 | 155to170 °C |
| Films Properties | Test Condition | Test Method | NATUREWORKS USA/4032D |
|---|---|---|---|
| Film Thickness - Tested) | 25 µm | ||
| Water Vapor Transmission Rate | ASTMF1249 | 380 g·mm/m²/atm/24hr | |
| Elmendorf Tear Strength (MD) | 25µm | ASTMD1922 | 17 g |
| Tensile Strain (TD) | Break,25µm | ASTMD882 | 100 % |
| Oxygen Transmission Rate | ASTMD1434 | 675 cm³/m²/24hr | |
| Tensile Strength (TD) | Yield,25µm | ASTMD882 | 145 Mpa |
| Spencer | 2.50 J | ||
| Secant Modulus (TD) | 25µm | ASTMD882 | 3790 Mpa |
| Tensile Strength (MD) | Yield,25µm | ASTMD882 | 103 Mpa |
| Elongation - MD | 断裂,25µm | ASTMD882 | 180 % |
| Carbon Dioxide Transmission Rate | 内部方法 | 2850 cm³/m²/24hr | |
| Elmendorf Tear Strength (TD) | 25µm | ASTMD1922 | 14 g |
| Physical | Test Condition | Test Method | NATUREWORKS USA/4032D |
|---|---|---|---|
| MediumDensity | 230°C | 1.08 g/cm³ | |
| Melt Mass-Flow Rate | 210°C/2.16kg | ASTMD1238 | 7.0 g/10min |
| Optical | Test Condition | Test Method | NATUREWORKS USA/4032D |
|---|---|---|---|
| Gloss | 20°,25.4µm | ASTMD2457 | 90 |
| Haze | 25.4µm | ASTMD1003 | 2.1 % |
Contact Us
Get App
Top