Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
59 kJ/m²
Impact strength of simply supported beam without notch
-30°C
ISO 179/1eU
42 kJ/m²
Charpy Notched Impact Strength
23°C
ISO 179/1eA
8.5 kJ/m²
Charpy Notched Impact Strength
-30°C
ISO 179/1eA
8.5 kJ/m²
flammability
شرایط آزمون
روش آزمون
نتیجه آزمون
UL flame retardant rating
0.38mm
UL 94
V-0
UL flame retardant rating
1.5mm
UL 94
5VA
Extreme Oxygen Index
ISO 4589-2
30 %
mechanical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
tensile strength
Break
ISO 527-2/1A/5
135 Mpa
elongation
Break,23°C
ASTM D638
2.5 %
Tensile strain
Break
ISO 527-2/1A/5
2.5 %
Bending modulus
23°C
ISO 178
10300 Mpa
tensile strength
Break,23°C
ASTM D638
134 Mpa
Tensile modulus
ISO 527-2/1A/1
10700 Mpa
Tensile modulus
23°C
ASTM D638
9650 Mpa
bending strength
23°C
ISO 178
200 Mpa
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Hot deformation temperature
8.0MPa,Unannealed
ISO 75-2/C
165 °C
Hot deformation temperature
1.8MPa,Unannealed
ISO 75-2/A
208 °C
Hot deformation temperature
1.8MPa,Unannealed
ASTM D648
206 °C
Hot deformation temperature
0.45MPa,Annealed
ASTM D648
221 °C
Hot deformation temperature
0.45MPa,Unannealed
ISO 75-2/B
220 °C
Vicat softening temperature
ISO 306/B50
225 °C
Melting temperature
ASTM D3418
225 °C
Melting temperature
ISO 11357-3
225 °C
Linear coefficient of thermal expansion
MD
ISO 11359-2
2.5E-05 cm/cm/°C
Linear coefficient of thermal expansion
TD
ISO 11359-2
7.7E-05 cm/cm/°C
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Water absorption rate
Equilibrium,23°C,50%RH
ISO 62
0.16 %
density
ASTM D792
1.66 g/cm³
density
ISO 1183
1.66 g/cm³
Melt Volume Flow Rate (MVR)
250°C/2.16kg
ISO 1133
7.00 cm3/10min
Shrinkage rate
MD
ASTM D955
0.30-0.50 %
Shrinkage rate
TD
ISO 294-4
0.80-1.3 %
Shrinkage rate
MD
ISO 294-4
0.10-0.80 %
Electrical performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Compared to the anti leakage trace index
IEC 60112
PLC 2
Compared to the anti leakage trace index
ASTM D3638
PLC 2
Arc resistance
ASTM D495
106 sec
Dissipation factor
1MHz
IEC 60250
0.015
Dissipation factor
100Hz
IEC 60250
3.3E-03
Dissipation factor
1MHz
ASTM D150
0.020
Relative permittivity
1MHz
IEC 60250
2.90
Relative permittivity
100Hz
IEC 60250
3.60
Dielectric constant
1MHz
ASTM D150
3.50
Surface resistivity
IEC 60093
1E+15 ohms
Volume resistivity
ASTM D257
2E+16 ohms·cm
Volume resistivity
IEC 60093
1E+15 ohms·cm
Dielectric strength
ASTM D149
20 KV/mm
Dielectric strength
IEC 60243-1
34 KV/mm
hardness
شرایط آزمون
روش آزمون
نتیجه آزمون
Rockwell hardness
M-Scale
ISO 2039-2
89
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.