Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 3316 CT JAPAN POLYPLASTIC
DURANEX® 
Automotive Applications
Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodJAPAN POLYPLASTIC/3316 CT
Charpy Notched Impact Strength23°CISO 179/1eA8.5 kJ/m²
-30°CISO 179/1eA8.5 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU59 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A7.7 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU42 kJ/m²
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/3316 CT
Rockwell hardnessM级ISO 2039-289
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/3316 CT
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 2
Volume resistivityASTM D2572E+16 ohms·cm
Dissipation Factor1MHzASTM D1500.020
Compared to the Leakage Tracking Index (CTI)ASTM D3638PLC 2
relative permittivity100HzIEC 602503.60
Dissipation Factor100HzIEC 602503.3E-03
dielectric constant1MHzASTM D1503.50
relative permittivity1MHzIEC 602502.90
Dissipation Factor1MHzIEC 602500.015
arc resistanceASTM D495106 sec
dielectric strengthIEC 60243-134 KV/mm
Volume resistivityIEC 600931E+15 ohms·cm
dielectric strengthASTM D14920 KV/mm
Surface ResistivityIEC 600931E+15 ohms
Mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/3316 CT
Tensile modulusISO 527-2/1A/110700 Mpa
bending strength23°CISO 178200 Mpa
Flexural modulus23°CISO 17810300 Mpa
Tensile modulus23°CASTM D6389650 Mpa
tensile strength 断裂ISO 527-2/1A/5135 Mpa
Tensile strain断裂ISO 527-2/1A/52.5 %
tensile strength 断裂,23°CASTM D638134 Mpa
elongation断裂,23°CASTM D6382.5 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/3316 CT
UL flame retardant rating0.38mmUL 94V-0
1.5mmUL 945VA
Limiting Oxygen IndexISO 4589-230 %
physical property Test ConditionTest MethodJAPAN POLYPLASTIC/3316 CT
Shrinkage rateMDASTM D9550.30-0.50 %
TDISO 294-40.80-1.3 %
MDISO 294-40.10-0.80 %
Water absorption rate平衡,23°C,50%RHISO 620.16 %
densityASTM D7921.66 g/cm³
ISO 11831.66 g/cm³
Melt volume flow rate250°C/2.16kgISO 11337.00 cm3/10min
Thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/3316 CT
Heat distortion temperature1.8MPa,未退火,HDTASTM D648206 °C
melting temperatureISO 11357-3225 °C
Heat distortion temperature0.45MPa,未退火,HDTISO 75-2/B220 °C
vicatISO 306/B50225 °C
Heat distortion temperature1.8MPa,未退火,HDTISO 75-2/A208 °C
melting temperatureASTM D3418225 °C
Linear coefficient of thermal expansionMDISO 11359-22.5E-05 cm/cm/°C
Heat distortion temperature0.45MPa,退火,HDTASTM D648221 °C
8.0MPa,未退火,HDTISO 75-2/C165 °C
Linear coefficient of thermal expansionTDISO 11359-27.7E-05 cm/cm/°C

Contact Us

Get App

Top