Impact strength of simply supported beam without notch
23°C
ISO 179
28 kJ/m²
Impact strength of cantilever beam gap
23°C
ISO 180
8.0 kJ/m²
Suspended wall beam without notch impact strength
23°C
ISO 180
26 kJ/m²
flammability
شرایط آزمون
روش آزمون
نتیجه آزمون
UL flame retardant rating
0.75 mm
UL 94
V-0
mechanical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Tensile modulus
ISO 527-2
10500 Mpa
tensile strength
Break
ISO 527-2
110 Mpa
Tensile strain
Break
ISO 527-2
1.5 %
Bending modulus
ISO 178
10300 Mpa
bending strength
ISO 178
170 Mpa
injection
شرایط آزمون
روش آزمون
نتیجه آزمون
drying temperature
120 °C
drying time
3.0 to 5.0 hr
Processing (melt) temperature
280 to 310 °C
Mold temperature
130 to 155 °C
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Hot deformation temperature
0.45 MPa, Unannealed
ISO 75-2/B
265 °C
Hot deformation temperature
1.8 MPa, Unannealed
ISO 75-2/A
230 °C
Linear coefficient of thermal expansion
Flow : -30 to 30°C
TMA
1.9E-5 cm/cm/°C
Linear coefficient of thermal expansion
Across Flow : -30 to 30°C
TMA
4.2E-5 cm/cm/°C
RTI Elec
UL 746
130 °C
RTI Imp
UL 746
120 °C
RTI
UL 746
130 °C
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
density
ISO 1183
1.45 g/cm³
Shrinkage rate
横向Flow
Internal Method
0.30 - 0.70 %
Shrinkage rate
Flow
Internal Method
0.10 - 0.40 %
Water absorption rate
Equilibrium, 23°C, 50% RH
ISO 62
0.020 %
Electrical performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Volume resistivity
IEC 60093
> 1.0E+16 ohms·cm
Dielectric strength
ASTM D149
35 KV/mm
Dielectric constant
1 MHz
IEC 60250
3.00
Dissipation factor
1 MHz
IEC 60250
2.0E-3
Arc resistance
ASTM D495
PLC 6
Compared to the anti leakage trace index
IEC 60112
PLC 1
High arc combustion index
0.75 mm
UL 746
PLC 0
High arc combustion index
1.5 mm
UL 746
PLC 0
High voltage arc tracing rate
UL 746
PLC 3
Hot wire ignition
0.75 mm
UL 746
PLC 3
Hot wire ignition
1.5 mm
UL 746
PLC 2
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.