برگه داده فنی مقایسهoptical performance شرایط آزمون روش آزمون نتیجه آزمون Refractive index ASTM D542 1.586 transmissivity ASTM D1003 89.0 % turbidity ASTM D1003 0.70to1.5 %
impact performance شرایط آزمون روش آزمون نتیجه آزمون Impact strength of cantilever beam gap 23°C,3.20mm ASTM D256 700 J/m
flammability شرایط آزمون روش آزمون نتیجه آزمون Extreme Oxygen Index ASTM D2863 26 % Average degree of combustion ASTM D635 3 CM UL flame retardant rating 0.50mm UL 94 V-2 UL flame retardant rating 1.6mm UL 94 V-2 UL flame retardant rating 2.5mm UL 94 V-2 UL flame retardant rating 3.0mm UL 94 V-2 Ignition temperature of heating wire 2.0mm IEC 60695-2-13 850 °C
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون Bending modulus ASTM D790 2410 Mpa bending strength ASTM D790 96.0 Mpa Tensile modulus ASTM D638 2340 Mpa tensile strength Yield,23°C ASTM D638 60.0 Mpa tensile strength Ultimate ASTM D638 61.0 Mpa elongation Yield ASTM D638 6.0 % elongation Break ASTM D638 150 %
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 0.45MPa,Annealed,4.00mm ASTM D648 139 °C Hot deformation temperature 1.8MPa,Unannealed,4.00mm ASTM D648 122 °C Hot deformation temperature 1.8MPa,Annealed,4.00mm ASTM D648 136 °C Vicat softening temperature ASTM D15254 144 °C Ball pressure temperature IEC 60598-1 >125 °C Linear coefficient of thermal expansion MD:-40to82°C ASTM D696 6.8E-05 cm/cm/°C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون melt mass-flow rate 300°C/1.2kg ASTM D1238 30 g/10min Shrinkage rate MD ASTM D955 0.50-0.70 % Water absorption rate 23°C,24hr ASTM D570 0.15 % Water absorption rate Equilibrium,23°C,50%RH ASTM D570 0.32 %
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Volume resistivity 23°C ASTM D257 2E+17 ohms·cm Dielectric strength ASTM D149 17 KV/mm Dielectric constant 60Hz ASTM D150 3.00 Dissipation factor 60Hz ASTM D150 1E-03 Compared to the anti leakage trace index 2.00mm IEC 60112 PLC 2
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.