برگه داده فنی مقایسهOther performance شرایط آزمون روش آزمون نتیجه آزمون Linear coefficient of thermal expansion 1E-03 cm/cm/°C Linear coefficient of thermal expansion 1.5E-03 cm/cm/°C Linear coefficient of thermal expansion ASTME831 3E-03 cm/cm/°C Linear coefficient of thermal expansion ASTME831 7E-03 cm/cm/°C
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون Suspended wall beam without notch impact strength 抗压强度 ASTM D695 295 Mpa Suspended wall beam without notch impact strength 23°C ASTM D256 320 J/m Impact strength of cantilever beam gap 23°C ASTM D256 75 J/m Bending modulus 23°C ASTM D790 19300 Mpa bending strength 23°C ASTM D790 241 Mpa Elongation at Break 泊松比 ASTME132 0.34 Elongation at Break 23°C ASTM D638 1.1 % tensile strength 23°C ASTM D638 159 Mpa
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 导热系数 ASTMC177 0.510 W/m/K Hot deformation temperature 最高使用温度 220-240 °C Hot deformation temperature 1.80MPaUnannealed ASTM D648 265 °C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون Shrinkage rate TD,3.20mm ASTM D995 0.40 % Shrinkage rate MD,3.18mm ASTM D995 0.20 % density ASTM D792 1.94 g/cm³
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Volume resistivity ASTM D257 1E+15 Ω.cm Surface resistivity ASTM D257 1E+16 Ω.cm Dielectric strength ASTM D149 10 KV/mm Dissipation factor 耐电弧性 ASTM D495 180 S Dissipation factor ASTM D150 3E-03 Dissipation factor ASTM D150 2E-03 Dielectric constant ASTM D150 4.7 1kHz Dielectric constant ASTM D150 4.6 1MHz Dissipation factor 相对漏电起痕指数 ASTM D3638 225 V
hardness شرایط آزمون روش آزمون نتیجه آزمون Rockwell hardness ASTM D785 119 R Rockwell hardness ASTM D785 101 M(Scale)
flame retardant performance شرایط آزمون روش آزمون نتیجه آزمون UL flame retardant rating UL -94 V-0 6.00mm UL flame retardant rating UL -94 V-0 3.00mm Extreme Oxygen Index ASTM2863 65 % UL flame retardant rating UL -94 V-0.5VA 1.50mm UL flame retardant rating UL -94 V-0 0.71mm
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.