Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS BR111 CPCHEM USA
Ryton®
Sports equipment、Automotive components、Application in the automo
Antichemical、High temperature resistan、Filler: Glass mineral
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | CPCHEM USA/BR111 |
|---|---|---|---|
| Linear coefficient of thermal expansion | 1.5E-03 cm/cm/°C | ||
| ASTME831 | 7E-03 cm/cm/°C |
| hardness | Test Condition | Test Method | CPCHEM USA/BR111 |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 101 M（Scale） | |
| ASTM D785 | 119 R |
| Electrical performance | Test Condition | Test Method | CPCHEM USA/BR111 |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 3E-03 | |
| 耐电弧性 | ASTM D495 | 180 S | |
| Surface Resistivity | ASTM D257 | 1E+16 Ω.cm | |
| dielectric constant | ASTM D150 | 4.7 1kHz | |
| Volume resistivity | ASTM D257 | 1E+15 Ω.cm | |
| dielectric strength | ASTM D149 | 10 KV/mm | |
| dielectric constant | ASTM D150 | 4.6 1MHz | |
| Dissipation Factor | 相对漏电起痕指数 | ASTM D3638 | 225 V |
| Mechanical properties | Test Condition | Test Method | CPCHEM USA/BR111 |
|---|---|---|---|
| elongation at break | 泊松比 | ASTME132 | 0.34 |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 75 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 320 J/m |
| 抗压强度 | ASTM D695 | 295 Mpa | |
| bending strength | 23°C | ASTM D790 | 241 Mpa |
| elongation at break | 23°C | ASTM D638 | 1.1 % |
| Flexural modulus | 23°C | ASTM D790 | 19300 Mpa |
| tensile strength | 23°C | ASTM D638 | 159 Mpa |
| Flame retardant performance | Test Condition | Test Method | CPCHEM USA/BR111 |
|---|---|---|---|
| Limiting Oxygen Index | ASTM2863 | 65 % | |
| UL flame retardant rating | UL -94 | V-0 0.71mm | |
| UL -94 | V-0.5VA 1.50mm | ||
| UL -94 | V-0 3.00mm | ||
| UL -94 | V-0 6.00mm |
| physical property | Test Condition | Test Method | CPCHEM USA/BR111 |
|---|---|---|---|
| Shrinkage rate | MD,3.18mm | ASTM D995 | 0.20 % |
| density | ASTM D792 | 1.94 g/cm³ | |
| Shrinkage rate | TD,3.20mm | ASTM D995 | 0.40 % |
| Thermal performance | Test Condition | Test Method | CPCHEM USA/BR111 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa未退火，HDT | ASTM D648 | 265 °C |
| 最高使用温度，HDT | 220-240 °C | ||
| 导热系数，HDT | ASTMC177 | 0.510 W/m/K |
Contact Us
Get App
Top