برگه داده فنی مقایسهflammability شرایط آزمون روش آزمون نتیجه آزمون UL flame retardant rating 1.5 mm UL 94 V-0 UL flame retardant rating 1.2 mm UL 94 V-1
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون bending strength ISO 178 205 Mpa Bending modulus ISO 178 11000 Mpa tensile strength ISO 527-2 130 Mpa
injection شرایط آزمون روش آزمون نتیجه آزمون Screw speed 50 to 90 rpm Back pressure 5.00 to 20.0 Mpa Mold temperature 60 to 80 °C Spray nozzle temperature 230 to 250 °C Temperature at the front of the material cylinder 240 to 250 °C Temperature in the middle of the barrel 220 to 240 °C Temperature at the rear of the barrel 190 to 230 °C drying time 3.0 to 5.0 hr drying temperature 80 to 120 °C
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 1.8 MPa, Unannealed ISO 75-2/A 155 °C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون Shrinkage rate Flow ASTM D955 0.20 - 0.40 %
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Volume resistivity Internal Method 1.0E+2 ohms·cm Surface resistivity Internal Method 4.0E+2 ohms
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.