原料比对
产品信息
品名
品牌名
典型应用
特性
认证
PC H-2000R MITSUBISHI THAILAND
IUPILON™
Automotive sector、Medical packaging、Electronic field、Electrical field
High mobility
UL
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
物性数据
| Thermal Properties | 测试条件 | 测试方法 | MITSUBISHI THAILAND/H-2000R |
|---|---|---|---|
| Linear thermal expansion coefficient | MD | ISO11359-2 | 6.5E-05 cm/cm/°C |
| Heat Deflection Temperature | 0.45MPa,未退火 | ISO75-2/B | 138 °C |
| 1.8MPa,未退火 | ISO75-2/A | 124 °C | |
| Linear thermal expansion coefficient | TD | ISO11359-2 | 6.6E-05 cm/cm/°C |
| Mechanical Properties | 测试条件 | 测试方法 | MITSUBISHI THAILAND/H-2000R |
|---|---|---|---|
| Flexural Modulus | ISO178 | 2300 Mpa | |
| Tensile Strain | 屈服 | ISO527-2 | 6.6 % |
| Tensile Stress | 屈服 | ISO527-2 | 62.0 Mpa |
| Nominal Tensile Strain at Break | ISO527-2 | 120 % | |
| Flexural Stress | ISO178 | 93.0 Mpa | |
| Tensile Modulus | ISO527-2 | 2400 Mpa |
| Physical | 测试条件 | 测试方法 | MITSUBISHI THAILAND/H-2000R |
|---|---|---|---|
| Melt Mass-Flow Rate | 300°C/1.2kg | ISO1133 | 22 g/10min |
| Modeling Shrinkage | 吸水率(饱和,23°C) | 0.24 % | |
| TD:3.20mm | 0.50to0.70 % | ||
| Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 20.0 cm3/10min |
| Modeling Shrinkage | MD:3.20mm | 0.50to0.70 % |
| Impact Properties | 测试条件 | 测试方法 | MITSUBISHI THAILAND/H-2000R |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 23°C | ISO179 | NoBreak |
| Electrical Properties | 测试条件 | 测试方法 | MITSUBISHI THAILAND/H-2000R |
|---|---|---|---|
| Volume Resistivity | IEC60093 | 3E+16 ohms·cm | |
| Dielectric Strength | 3.00mm | IEC60243-1 | 18 KV/mm |
| Surface Resistivity | IEC60093 | 6E+15 ohms | |
| Relative Permittivity | 1MHz | IEC60250 | 3.10 |
| 100Hz | IEC60250 | 3.10 | |
| Dielectric Strength | 1.00mm | IEC60243-1 | 31 KV/mm |
| Dissipation Factor? | 1MHz | IEC60250 | 9E-03 |
| 100Hz | IEC60250 | 6E-04 | |
| Comparative Tracking Index | CTI | UL746 | PLC 2 |
联系我们
下载APP
Top