Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density / Specific Gravity | | ASTMD792 | 0.900 | g/cm³ |
| Melt Mass-Flow Rate | | ASTMD1238 | 9.0 | g/10min |
| Modeling Shrinkage | MD:2.00mm | 内部方法 | 1.6 | % |
| Modeling Shrinkage | TD:2.00mm | 内部方法 | 1.7 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | 屈服 | ASTMD638 | 27.5 | Mpa |
| Tensile Strength | 断裂 | ASTMD638 | 23.0 | Mpa |
| Tensile Elongation | 断裂 | ASTMD638 | 300 | % |
| Flexural Modulus | | ASTMD790 | 1290 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Heat Deflection Temperature | 0.45MPa,未退火 | ASTMD648 | 124 | °C |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | -20°C | ASTMD256 | 45 | J/m |
| Notched Izod Impact Strength | 23°C | ASTMD256 | 92 | J/m |
| Hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R级 | ASTMD785 | 91 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices