PP ISPLEN® PC 262 AV
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.03 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 6.5 g/10min | |
| Shrinkage rate | ISO 294-4 | 1.0to1.5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Break | ISO 527-2 | 27.0 MPa |
| Tensile strain | Break | ISO 527-2 | 3.5 % |
| Flexural modulus | ISO 178 | 1750 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | 4.5 kJ/m² | |
| ISO 180 | 5.0 kJ/m² | ||
| Suspended wall beam without notch impact strength | ISO 180 | 55 kJ/m² | |
| ISO 180 | 80 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top