PA6 Aegis® HP521
6
- Properties:Talc filler15% filler by weightGood UV resistance
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 18 g/10 min | |
| Shrinkage rate | ASTM D955 | 1.2 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| durometer hardness | ASTM D2240 | 67 | |
| tensile strength | ASTM D638 | 21.4 Mpa | |
| Bending modulus tangent | ASTM D790 | 1520 Mpa | |
| Impact strength of cantilever beam gap | ASTM D256 | 88 J/m | |
| Falling hammer impact | ASTM D5420 | 22.6 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 104 °C | |
| ASTM D648 | 57.2 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top