Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 16 g/10min |
| Shrinkage rate | | ASTMD955 | 0.40 % |
| Shrinkage rate | | ASTMD955 | 0.60 % |
| Water absorption rate | | ASTMD570 | 0.16 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 10500 Mpa |
| tensile strength | | ASTMD638 | 115 Mpa |
| Flexural modulus | | ASTMD790 | 8000 Mpa |
| bending strength | | ASTMD790 | 180 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD256 | 60.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 1.3E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 20 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 220 °C |
| | ASTMD648 | 208 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices