HDPE

HDPE NPC PE HD-5403GA NPC Alliance Corporation

Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ASTM D256	7.0 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ISO 527-2/2	28.0 MPa
Tensile strain	Break	ISO 527-2/2	>900 %
Bending modulus		ISO 178	1000 MPa

thermal performance	Test Condition	Test Method	Test Result
Melting temperature		ASTM D2117	130 °C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D1505	0.953 g/cm³
melt mass-flow rate	190°C/2.16kg	ASTM D1238	0.33 g/10min
melt mass-flow rate	melt mass-flow rate	190°C/21.6kg	ASTM D1238	34 g/10min
Environmental stress cracking resistance	10%Igepal,F50	ASTM D1693B	20.0 hr

Supplementary Information	Test Condition	Test Method	Test Result
Blow molding machine barrel temperature			170to190 °C
Blow molding mouth mold temperature			175to190 °C
Blow molding temperature			170to200 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top