Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 0.988 g/cm³ |
| Shrinkage rate | | ASTM D955 | 0.90to1.1 % |
| Shrinkage rate | | ASTM D955 | 1.5to2.0 % |
| density | | ASTM D792 | 0.988 g/cm³ |
| Shrinkage rate | | ASTM D955 | 0.90to1.1 % |
| Shrinkage rate | | ASTM D955 | 1.5to2.0 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | M-Scale | ASTM D785 | 105 |
| Rockwell hardness | M-Scale | ASTM D785 | 105 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 48.0 MPa |
| bending strength | | ASTM D790 | 90.0 MPa |
| tensile strength | | ASTM D638 | 48.0 MPa |
| bending strength | | ASTM D790 | 90.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTM D256 | 51 J/m |
| Suspended wall beam without notch impact strength | | ASTM D256 | 51 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTM D257 | 1E+15 ohms |
| Surface Resistivity | | ASTM D257 | 1E+15 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 135 °C |
| Heat distortion temperature | | ASTM D648 | 135 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare