Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | | 0.4/1.0 % |
| processability | Test Condition | Test Method | Test Result |
|---|
| Melt Temperature | | | 260-280 °C |
| Mold temperature range | | | 60-90 °C |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO 1133 | 22 CM |
| Water absorption rate | | ISO 62 | 0.4 % |
| density | | ISO 1183 | 1.58 g/cm |
| viscosity number | | ISO 1628 | 112 ml/g |
| Color | | | n.bk |
| Water absorption rate | | ISO 62 | 0.2 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/leA | 6.1 KJ/m |
| Charpy Notched Impact Strength | | ISO 179/leU | 36 KJ/m |
| elongation | | ISO 527-2 | 2.2 % |
| Tensile modulus | | ISO 527-2 | 8350 Mpa |
| tensile strength | | ISO 527-2 | 117 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Relative arc diameter index CTl | | IEC 60112 | CTl200 |
| Dissipation Factor | | IEC 60250 | 0.0024 |
| dielectric constant | | IEC 60250 | 3.5 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| burning rate | | UL 94 | 94v-0 CLASS |
| Heat distortion temperature | | ISO 75-2 | 180/215 °C |
| melting temperature | | ISO 3146 | 220-225 °C |
| burning rate | | IEC 707 | BH3-15mm/min CLASS |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices