PBT B2520 BASF SHANGHAI

Form：Granules | Grade：Injection grade

Properties:

High mobility

Typical Applications:

switchThin walled componentsLaptop caseApplication in the automotive field

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	switch \| Thin walled components \| Laptop case \| Application in the automotive field
Properties:	High mobility

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23°C	ISO 527-2	57.0	Mpa
Elongation at Break	23°C	ISO 527-2	4.0	%
Tensile modulus	23°C	ISO 527-2	2550	Mpa
Charpy Notched Impact Strength	23°C	ISO 179/1eA	3.1	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	170	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	70	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPaUnannealed	ISO 75-2/Bf	140	°C
Hot deformation temperature	Hot deformation temperature	1.80MPaAnnealed	ISO 75-2/Af	57.0	°C
Vicat softening temperature	Melting Temperature	ISO 11357-3	223	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1.3E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	导热系数	DIN 52612	0.27	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.31	g/cm³
Shrinkage rate	MD2.0mm	ISO 294-4	1.5	%
Shrinkage rate	Shrinkage rate	TD2.0mm	ISO 294-4	1.5	%
Water absorption rate	(23°C,24hr)	ISO 62	0.40	%
Water absorption rate	Water absorption rate	(23°C,50RH)	ISO 62	0.20	%
melt mass-flow rate	250℃/2.16Kg	ISO 1133	55.0	cm3/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1E+18	Ω.cm
Dielectric constant	23°C	IEC 60250	3.30	100HZ
Dielectric constant	Dielectric constant	23°C	IEC 60250	3.30	1MHz
Dissipation factor	23°C	IEC 60250	1.3E-03	100HZ
	Dissipation factor	23°C	IEC 60250	0.020	1MHz
	Dissipation factor	Dissipation factor	相对漏电起痕指数	IEC 60112	500	V
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	HB	0.800mm
UL flame retardant rating	UL flame retardant rating		UL -94	HB	1.60mm

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top