
PI, TS APICAL 100AV Kaneka Corporation
Typical Applications:
Insulation materials printed circuit boards films tapes
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Insulation materials | printed circuit boards | films | tapes |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.25mm | UL 94 | V-0 | |
| Extreme Oxygen Index | ASTM D2863 | 38 | % | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Friction coefficient | Itself - Static | ASTM D1894 | 0.50 | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| RTI Elec | 0.025mm | UL 746 | 240 | °C |
| RTI | 0.025mm | UL 746 | 200 | °C |
| specific heat | ASTMC351 | 1100 | J/kg/°C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ASTM D1505 | 1.42 | g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | 4E-03 | % |
| Water absorption rate | 24hr | ASTM D570 | 2.9 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D257 | 3E+15 | ohms·cm | |
| Dielectric strength | ASTM D149 | 310 | kV/mm | |
| Dielectric constant | 1kHz | ASTM D150 | 3.40 | |
| Dissipation factor | 1kHz | ASTM D150 | 1.4E-03 | |
| Hot wire ignition | 0.0250mm | UL 746 | PLC 0 | sec |
| film | Test Condition | Test Method | Test Result | Test Unit |
| film thickness | 25 | µm | ||
| Secant modulus | ASTM D882 | 3170 | MPa | |
| tensile strength | Break | ASTM D882 | 241 | MPa |
| elongation | Break | ASTM D882 | 95 | % |
| Elmendorf tear strength | MD | ASTM D1922 | 8.0 | g |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.