PA66 Clariant Nylon 6/6 66G33-L Clariant Plastics & Coatings Ltd.

Properties:
Filler
glass fiber reinforced material
33%
filler by weight
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.37 g/cm³
Shrinkage rate		ASTM D955	0.30to0.70 %

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB
	UL flame retardant rating		UL 94	HB
	UL flame retardant rating	UL flame retardant rating		UL 94	HB

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	145 MPa
elongation	Break	ASTM D638	4.0 %
Flexural modulus		ASTM D790	8270 MPa
bending strength		ASTM D790	193 MPa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	64 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D1822	58.8 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
RTI		UL 746	110 °C
Heat distortion temperature		ASTM D648	253 °C
RTI Imp		UL 746	65.0 °C
RTI		UL 746	105 °C
RTI	RTI		UL 746	110 °C
Heat distortion temperature		ASTM D648	248 °C
Heat distortion temperature	Heat distortion temperature	Melting Temperature	ASTM D648	257 °C
RTI Elec		UL 746	105 °C
	RTI Elec		UL 746	110 °C
	RTI Elec	RTI Elec		UL 746	110 °C
RTI Imp		UL 746	65.0 °C
RTI Imp	RTI Imp		UL 746	65.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top