HDPE L0860P Liaoyang Petrochemical
0
- Usages:Used for producing plastic modified chlorinated polyethylene
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 0.6-1.0 g/10min | ||
| 0.6-1.0 g/10min | |||
| 0.5-1.1 g/10min | |||
| density | 0.955-0.960 g/cm | ||
| 0.954-0.961 g/cm | |||
| 0.954-0.962 g/cm | |||
| wax content | ≤1.5 % | ||
| ≤1.5 % | |||
| ≤2.0 % | |||
| Apparent density | ≥0.38 g/cm | ||
| ≥0.37 g/cm | |||
| ≥0.36 g/cm |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| cleanliness | Ⅰ 级 | ||
| Ⅰ 级 | |||
| Ⅱ 级 | |||
| Sieve residue | ≤3 % | ||
| ≤5 % | |||
| ≤7 % | |||
| ≤20 % | |||
| ≤20 % | |||
| ≤20 % | |||
| S value | 9.5-14 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ≤136 ℃ | ||
| ≤136 ℃ | |||
| ≤137 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top