TPU-PC Quadrathane™ ALC-80A-B30
0
CompareTechnical Data Sheet
| thermosetting | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Post curing time | 6.0to10 hr |
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.44 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 7.5 g/10min | |
| Shrinkage rate | ASTM D955 | 0.60to1.0 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | Shore A | ASTM D2240 | 80 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 12.4 MPa |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D412 | 4.14 MPa | |
| ASTM D412 | 6.21 MPa | ||
| ASTM D412 | 11.0 MPa | ||
| Break | ASTM D412 | 37.9 MPa | |
| elongation | Break | ASTM D412 | 480 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top