PP H30S
0
- Properties:High fluiditymedium molecular weight distribution
- Usages:Mainly used for high-speed drawing of low denier cotton fibers (drawing speed up to 3kmmin)
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| fish eye | ≤20 个/m | ||
| isotactic index | ≥94.0 % | ||
| fish eye | ≤500 个/m | ||
| yellow index | ≤4 | ||
| Total ash content | ≤200 PPm | ||
| fish eye | ≤0 个/m | ||
| melt mass-flow rate | 22.0-48.0 g/10min | ||
| Chloride content | ≤30 PPm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile yield strength | ≥29.4 MPa | ||
| Rockwell hardness | ≥95 R标尺 | ||
| flexural modulus | ≥1400 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ≥88 ℃ | |||
| vicat | ≥152 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top