Share
Add to Compare

PC 9KF23500 HI 4Plas

Product Description
Certificates(0)
Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performanceTest ConditionTest MethodTest ResultTest Unit
Suspended wall beam without notch impact strength23°CISO 180/1U无断裂
Suspended wall beam without notch impact strength-30°CISO 180/1U无断裂
Impact strength of cantilever beam gap23°CISO 180/1A12kJ/m²
Impact strength of cantilever beam gap-20°CISO 180/1A8.0kJ/m²
flammabilityTest ConditionTest MethodTest ResultTest Unit
Hot filament ignition temperature2.0mmIEC 60695-2-13960°C
UL flame retardant rating3.2mmUL 94V-0
UL flame retardant rating1.6mmUL 94V-0
mechanical propertiesTest ConditionTest MethodTest ResultTest Unit
Tensile strainBreak,23°CISO 527-2/520%
tensile strengthBreak,23°CISO 527-2/545.0MPa
Tensile modulus23°CISO 527-2/52100MPa
thermal performanceTest ConditionTest MethodTest ResultTest Unit
Melting temperatureDSC220to230°C
Vicat softening temperatureISO 306/B160°C
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A60.0°C
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B130°C
Physical propertiesTest ConditionTest MethodTest ResultTest Unit
water contentISO 960<1000ppm
Water absorption rateEquilibrium,23°C,50%RHISO 620.10%
melt mass-flow rate270°C/2.16kgISO 113360g/10min
densityISO 11831.34g/cm³
Electrical performanceTest ConditionTest MethodTest ResultTest Unit
Compared to the anti leakage trace indexIEC 60112PLC 2
Volume resistivityIEC 600931E+15ohms·cm
Surface resistivityIEC 600931E+15ohms
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.