ABS TAIRILAC® AX4300
319
- Properties:Moderate heat resistanceHeat resistanceHigh impact resistance
- Usages:Automotive sectorauto partsBlow molded products
- Certificates:MSDSTDSProcessingMSDSULRoHSSVHCPSC
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238(ISO 1133) | 5.5 g/10min | |
| density | ASTM D-792(ISO 1183) | 1.05 | |
| Shrinkage rate | FCFC Method | 0.4-0.7 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D-785(ISO 2039/2) | R-103 | |
| bending strength | ASTM D-790(ISO 178) | 720(71) kg/m2(MPa) | |
| tensile strength | ASTM D-638(ISO 527) | 430(42) kg/m2(MPa) | |
| Impact strength of cantilever beam gap | ASTM D-256(ISO R180) | 30(294) kg.cm/cm(J/m) | |
| Flexural modulus | ASTM D-790(ISO 178) | 21000(2050) kg/m2(MPa) |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525(ISO 306) | 119 | |
| Heat distortion temperature | ASTM D-648(ISO 75/A) | 100 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top