Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.52 g/cm³ |
| Shrinkage rate | | ISO294-4 | 1.0 % |
| Shrinkage rate | | ISO294-4 | 0.40 % |
| Water absorption rate | | 内部方法 | 0.15 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Flammability level | | IEC60695-11-10,-20 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Break | ISO527-2 | 145 MPa |
| Tensile strain | Break | ISO527-2 | 3.0 % |
| Tensile modulus | | ISO527-2 | 10000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 12 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 12 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 60 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 60 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+15 ohms |
| Volume resistivity | | IEC60093 | 1E+19 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | ISO11357-3 | 225 °C |
| | ISO11359-2 | 4E-05 cm/cm/°C |
| | ISO75-2/B | 220 °C |
| | ISO75-2/A | 205 °C |
| | ISO11359-2 | 7E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare