
PBT ESTOPLAST EP 1500BB01 Ester Industries Ltd.
Typical Applications:
Applications in the automotive electrical and electronic fields LightingApplications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Applications in the automotive | electrical | and electronic fields | Lighting | Applications |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256A | 50 | J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 无断裂 | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.5mm | UL 94 | HB | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ASTM D790 | 82.0 | MPa | |
| elongation | Break | ASTM D638 | 10 | % |
| tensile strength | Yield | ASTM D638 | 53.0 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 140 | °C |
| 1.8MPa,Unannealed | ASTM D648 | 70.0 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.25 | % |
| Saturation,23°C | ISO 62 | 0.50 | % | |
| density | ASTM D792 | 1.30 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Compared to the anti leakage trace index | IEC 60112 | PLC 1 | ||
| Volume resistivity | ASTM D257 | 1E+14 | ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.