ABS ROTEC® 1001 FR VO/4
57
- Properties:Filler: Glass beads20% filler by weight
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 64 g/10min | |
| Shrinkage rate | ISO 294-4 | 0.30-0.60 % | |
| Water absorption rate | ISO 62 | 0.30 % | |
| density | ISO 1183 | 1.20 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| Burning wire flammability index | IEC 60695-2-12 | 850 °C | |
| Hot filament ignition temperature | IEC 60695-2-13 | 750 °C | |
| IEC 60695-2-13 | 700 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2800 Mpa | |
| tensile strength | ISO 527-2/50 | 42.0 Mpa | |
| Tensile strain | ISO 527-2/50 | 10 % | |
| Flexural modulus | ISO 178 | 2600 Mpa | |
| bending strength | ISO 178 | 65.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 12 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 70 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 75.0 °C | |
| vicat | ISO 306/B50 | 86.0 °C | |
| Ball indentation test | IEC 60695-10-2 | <2.00 mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top