Phenolic Plenco 03303 (Injection) Plastics Engineering Co.

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityASTM D7921.54 g/cm³
Apparent densityASTM D18950.62 g/cm³
Shrinkage rateASTM D9550.84 %
Water absorption rateASTM D5700.33 %
hardnessTest ConditionTest MethodTest Result
Rockwell hardnessASTM D78582
flammabilityTest ConditionTest MethodTest Result
UL flame retardant ratingUL 94V-0
Mechanical propertiesTest ConditionTest MethodTest Result
Tensile modulusASTM D63810000 MPa
tensile strength ASTM D63857.0 MPa
elongationBreakASTM D6380.80 %
Flexural modulusASTM D7908630 MPa
bending strengthASTM D79082.9 MPa
compressive strengthASTM D695180 MPa
Impact resistanceTest ConditionTest MethodTest Result
Impact strength of cantilever beam gapASTM D25619 J/m
Charpy Notched Impact StrengthASTM D25618.0 J/m
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityASTM D2573.1E+11 ohms·cm
dielectric strengthASTM D1499.2 kV/mm
dielectric strengthASTM D1496.0 kV/mm
dielectric constantASTM D1505.60
Dissipation FactorASTM D1500.070
arc resistanceASTM D495180 sec
Compared to the Leakage Tracking Index (CTI)UL 746PLC 3
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureASTM D648168 °C
Continuous use temperatureASTM D794200 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top