SPS XAREC™ N WA7020 IDEMITSU JAPAN
79
- Properties:Glass fiber reinforced
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| density | ISO 1183/B | 1.26 | g/cm | |
| Water absorption rate | 24hr,23℃ | ISO 62 | 0.22 | % |
| Shrinkage rate | Across Flow | ISO 294-4 | 0.50-0.80 | % |
| Flow | ISO 294-4 | 0.25-0.50 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Yield stress | ISO 527-2 | 145 | Mpa | |
| Fracture strain | ISO 527-2 | 3.0 | % | |
| Bending modulus | ISO 178 | 7300 | Mpa | |
| bending strength | ISO 178 | 215 | Mpa | |
| Charpy notch impact strength | ISO 179 | 7.00 | KJ/m | |
| Impact strength of simply supported beam without notch | ISO 179 | 49.0 | KJ/m | |
| Impact strength of cantilever beam gap | ISO 180 | 7.00 | KJ/m | |
| Cantilever beam without notch impact strength | ISO 180 | 43.0 | KJ/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.80MPa，未退火 | ISO 75-2/A | 240 | °C |
| Flame retardant grade | 1.50mm | UL 94 | HB | |
| Hot deformation temperature | 0.45MPa，未退火 | ISO 75-2/B | 260 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume resistivity | IEC 60093 | 3.1E+15 | ohm.cm | |
| Dielectric constant | IEC 60250 | 3.100 | ||
| Dielectric loss factor | IEC 60250 | 0.0340 | ||
| Electrical strength | IEC 60243-1 | 25.00 | KV/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top