PPA UFL4032 BK8115 SABIC INNOVATIVE NANSHA

Form：Granules

Properties:

Thermal stabilitywear resistant

Typical Applications:

Car hoodPlastic bagbearingElectrical appliances

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Car hood \| Plastic bag \| bearing \| Electrical appliances
Properties:	Thermal stability \| wear resistant

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ISO 180/1A	10	kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	34	kJ/m²
Dart impact	23°C,EnergyatPeakLoad	ASTM D3763	11.6	J
Multi axis Instrumented Impact Energy		ISO 6603-2	4.29	J
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ISO 527-2	71.0	Mpa
elongation	Break	ASTM D638	3.1	%
Tensile strain	Break	ISO 527-2	2.8	%
Bending modulus		ASTM D790	4350	Mpa
Bending modulus	Bending modulus		ISO 178	4170	Mpa
bending strength		ASTM D790	124	Mpa
bending strength	bending strength		ISO 178	114	Mpa
Tensile modulus		ASTM D638	4350	Mpa
Tensile modulus	Tensile modulus		ISO 527-2/1	4290	Mpa
tensile strength	Break	ASTM D638	73.4	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	141	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD：24hr	ASTM D955	0.20	%
	Shrinkage rate	TD：24hr	ASTM D955	0.70	%
		Shrinkage rate	TD:24hr	ISO 294-4	0.67	%
		Shrinkage rate	Shrinkage rate	MD:24hr	ISO 294-4	0.23	%
Water absorption rate	24hr,50%RH	ASTM D570	0.11	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.18	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top