EHMWPE DuraSurf™ STS
0
- Properties:physical property
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Crystallinity | ASTM D3417 | 50 % | |
| relative viscosity | ASTM D4020 | 230to350 cm³/g | |
| Dissipation Factor | ASTM D150 | 3.4E-03 | |
| tensile strength | ASTM D638 | 22.0 MPa | |
| ASTM D638 | 53.0 MPa | ||
| ASTM D638 | 49.0 MPa | ||
| ASTM D638 | 44.0 MPa | ||
| elongation | ASTM D638 | 60 % | |
| ASTM D638 | 460 % | ||
| ASTM D638 | 470 % | ||
| coefficient of friction | ASTM D1894 | 0.10to0.22 | |
| ASTM D1894 | 0.050to0.10 | ||
| ASTM D1894 | 0.050to0.080 | ||
| StaticDecay | <10 msec | ||
| <10 msec | |||
| <10 msec | |||
| Dissipation Factor | ASTM D150 | 0.059 | |
| ASTM D150 | 0.11 | ||
| ASTM D150 | 0.10 | ||
| ASTM D150 | 0.021 | ||
| ASTM D150 | 0.069 | ||
| ASTM D150 | 0.23 | ||
| ASTM D150 | 8.2E-03 | ||
| ASTM D150 | 2.2E-03 | ||
| Shore hardness | ASTM D2240 | 65 | |
| Tensile modulus | ASTM D638 | 725 MPa | |
| ASTM D638 | 731 MPa | ||
| ASTM D638 | 672 MPa | ||
| tensile strength | ASTM D638 | 23.0 MPa | |
| coefficient of friction | ASTM D1894 | 0.16 | |
| ASTM D1894 | 0.16 | ||
| ASTM D1894 | 0.16 | ||
| Impact strength of cantilever beam gap | ASTM D256 | 80 J/m | |
| melting temperature | 134 °C | ||
| 136 °C | |||
| Linear coefficient of thermal expansion | ASTM D696 | 9.2E-04 cm/cm/°C | |
| dielectric constant | ASTM D150 | 2.54 | |
| coefficient of friction | ASTM D1894 | 0.14 | |
| ASTM D1894 | 0.13 | ||
| ASTM D1894 | 0.14 | ||
| relative viscosity | ASTM D4020 | 230to350 cm³/g | |
| ASTM D4020 | 230to350 cm³/g | ||
| Shore hardness | ASTM D2240 | 65 | |
| ASTM D2240 | 65 | ||
| tensile strength | ASTM D638 | 20.0 MPa | |
| Linear coefficient of thermal expansion | ASTM D696 | 1.5E-04 cm/cm/°C | |
| Surface Resistivity | ASTM D257 | 1E+03 ohms | |
| ASTM D257 | 1E+03 ohms | ||
| ASTM D257 | 1E+03 ohms | ||
| Volume resistivity | ASTM D257 | 6E+07 ohms·cm | |
| ASTM D257 | 1.5E+07 ohms·cm | ||
| ASTM D257 | >2.0E+7 ohms·cm | ||
| dielectric strength | ASTM D149 | 14 kV/mm | |
| dielectric constant | ASTM D150 | 2.48 | |
| ASTM D150 | 2.45 | ||
| density | ASTM D792 | 0.930 g/cm³ | |
| Crystallinity | ASTM D3417 | 48 % | |
| ASTM D3417 | 47 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top